FacebookInstagram YouTube YouTube

JL3KH6 – Job Link® System Charge and Air Kit

Quick service checks just got quicker.

Wireless range of 1,000’.

Where to Buy

  • Directly connects to mobile device with Job Link System App
  • Quickly deploys for full snapshot of the refrigerant system
  • Great for critically charged systems
  • Fast accurate pipe temps with new Rapid Rail™ Sensor technology
  • Pressures auto calibrate at any elevation
  • Configurable psychrometers with flexible probe and sliding magnet

Fast, wireless and easy.

If you’re doing service checks with JL3KH6, it allows you to take a full system snapshot quickly and easily. It comes with two pressure probes (JL3PR) that are great for tight spaces, two pipe clamps (JL3PC) with Rapid Rail™ Sensor technology and two psychrometers (JL3RH) in a quick access padded case. The pipe clamps and psychrometers wirelessly send measurements to your SMAN Manifold and all three send measurements to your mobile device with the Job Link® System mobile app or up to 1,000’ away. Each tool is designed for agility and speed.

Innovative tech.

The pipe clamps use Rapid Rail sensor technology to deliver accuracy, speed and agility, even on the most awkward pipe configurations. The psychrometers’ flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts and elevated registers. When you need to attach a pressure probe, it’s quick and easy – with minimal refrigerant loss. Plus, our pressure sensors are designed to be accurate at any elevation.

What’s Included:

  • (2) Job Link Pipe Temp Probes – JL3PC
  • (2) Job Link Pressure Probes – JL3PR
  • (2) Job Link Psychrometer Probes – JL3RH
  • (1) Padded Carrying Case
  • (2) AAA Batteries Per Probe (12 Total)

Read More

Specifications User Manuals Print Material FAQs

See the Power of Job Link First Hand

Where To Buy

JL3KH6 – Job Link® System Charge and Air Kit

Quick service checks just got quicker.

Wireless range of 1,000’.

  • Directly connects to mobile device with Job Link System App
  • Quickly deploys for full snapshot of the refrigerant system
  • Great for critically charged systems
  • Fast accurate pipe temps with new Rapid Rail™ Sensor technology
  • Pressures auto calibrate at any elevation
  • Configurable psychrometers with flexible probe and sliding magnet

Fast, wireless and easy.

If you’re doing service checks with JL3KH6, it allows you to take a full system snapshot quickly and easily. It comes with two pressure probes (JL3PR) that are great for tight spaces, two pipe clamps (JL3PC) with Rapid Rail™ Sensor technology and two psychrometers (JL3RH) in a quick access padded case. The pipe clamps and psychrometers wirelessly send measurements to your SMAN Manifold and all three send measurements to your mobile device with the Job Link® System mobile app or up to 1,000’ away. Each tool is designed for agility and speed.

Innovative tech.

The pipe clamps use Rapid Rail sensor technology to deliver accuracy, speed and agility, even on the most awkward pipe configurations. The psychrometers’ flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts and elevated registers. When you need to attach a pressure probe, it’s quick and easy – with minimal refrigerant loss. Plus, our pressure sensors are designed to be accurate at any elevation.

What’s Included:

  • (2) Job Link Pipe Temp Probes – JL3PC
  • (2) Job Link Pressure Probes – JL3PR
  • (2) Job Link Psychrometer Probes – JL3RH
  • (1) Padded Carrying Case
  • (2) AAA Batteries Per Probe (12 Total)

SPECIFICATIONS

  • Wireless Range: 1000 feet or more (305 meters)
  • Wireless Frequency: 2.4 GHz
  • Battery: 2x AAA (included)
  • Battery Life: 150 hours typical alkaline
  • Auto Power Off (APO): 2 hours (can be disabled)
  • Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or Android™ 5.0

Job Link Pressure Probe – JL3PR

  • Connector Type: 45° Standard 1/4” NPT female flare
  • Best Accuracy: ±1 psig (±7 kPa)
  • Measurement Range: 0 to 580 psig (0 to 4000 kPa)
  • Maximum Overload: 800 psig (5500 kPa)
  • Water Resistant: Designed to IP55

Job Link Premium Pipe Clamp Probe – JL3PC

  • Pipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.
  • Accuracy: ±1°F (±0.6°C)
  • Measurement Range: -50°F to 257°F (-46°C to 125°C)
  • Stabilization Time: Three seconds typical
  • Measurement Feedback: Beeper and LED
  • Water Resistant: Designed to IP55
  • Patent: 10,365,165

Job Link Flex Psychrometer Probe – JL3RH

  • Flexible Probe: 0.36” (9mm) diameter, 9.25” (235mm) length
  • Best Accuracy: ±1°F (±0.6°C) ±2.5 %RH
  • Measurement Range: -4°F to 140°F (-20°C to 60°C) 0 %RH to 100 %RH

Opman JL3PR v16 Opman JL3PR v16

Opman JL3PC v16 Opman JL3PC v16

Opman_JL3RH_v15 Opman_JL3RH_v15

  • What is the range of JL3PR?

    • 1000 FT line of sight

  • Why am I not getting a superheat or subcooling measurement

    • There are three possibilities.

      • No pressure probe connected
      • No pipe clamp connected
      • No refrigerant selected
  • I have a 2-stage system, can I see both compressors at the same time?

    • Yes, hook up the probes you will be using and push the blue serial number next to the probe you would like to switch and select the probe you would like to see.

  • What is the range of JL3PC?

    • 1000 FT line of sight

  • Why does it show open when pipe clamp is closed

    • The pipe that the clamp is on may to need to be cleaned. Remove the clamp and use the Emory cloth provided to clean the pipe and put clamp back on.

  • Why are my temperature extreme (1000+F)

    • The probes update at a rapid speed between opening/closing, it uses an extreme value to deter the possibility of catching a miscalculation. It should go back to its actual temperature within seconds

  • What is the range of JL3RH?

    • 1000 FT line of sight

 
^