Turns out, there's an app for that.

Steve D., Hot Springs, Arkansas

“I am a senior technician with over 40 years’ experience in the HVAC/R industry. I have been a technician, service manager, and company owner at various stages of my career so I have a perspective from all areas of the trade.

I have several reasons for liking the Job Link system. If using all available instruments (the meter, dual Psychrometer, and gauges) you have the ability to produce a complete report for yourself and your customer. This report will include all readings from your instruments as well as any diagnostics, EER, SEER, and system capacity. No more transposed number, illegible notes, and very little typing by the tech.

Other great features are the pre work and post work reports. Show your customer exactly what you did for them. Also the photos and notes to how your customer condition of equipment before and after you worked your magic.

This system is also just as helpful for the inexperienced techs as the diagnostics will point out what needs attention.

I have used this for service agreement checkups as well as for the customer that doesn’t think their system is functioning at its full capacity. The numbers don’t lie. The professionalism is another benefit to both you and the customer. Add your company logo to further separate yourself from the competition.

Another very awesome feature is the ability for a senior tech or service manager to remotely access your readings in real time to help a tech that is struggling with what is wrong. The invoicing feature would be great for the small company or one man show.

In conclusion, I am more than impressed with the Job Link System. Almost all of our techs are going to this. You won’t be sorry if you do as well.”

Frank M., Raeford, NC

“There are so many reasons why I use and continue to use Job Link tools and app. The ability to be in two places at once, so no more walking back and forth from air handler to condenser to see what your gauges are reading.

With the newer eev technology in air handlers you can view your gauges from an attic while you test open and close the valve. Plus diagnostics at your finger tips

I can show the readings that normally only I could see to the homeowner, like the difference in capacity of unit that is under charged and when it is running with proper amount, or show them that the capacitor has tested weak.

With Job Link I feel confident that I make the right diagnosis on the equipment that I am working on, and avoid any call backs.”

Roger T., Towson, MD

“This week I went to an elderly couple’s condo. They had a fly by night company replace there system, a little 2 ton unit straight ac cost them 15k. They called us in to see why their utility bill was so high because they were only producing 11500 btu, and the system was at 430cfm. Basically there system was at a 1 ton capacity.

So Fieldpiece to the rescue .., 45 minutes after hooking up the Job Link System we were able to show them the system’s issues live. They couldn’t believe this technology was available and it wasn’t mandatory for all contractor to use it.

Other great features are the pre work and post work reports. Show your customer exactly what you did for them. Also the photos and notes to how your customer condition of equipment before and after you worked your magic.

We corrected airflow and adjusted the charge as Job Link directed us to, and at the end they were running at 23900 btu out of 24000.

Pretty good in my book, and needless to say they were relieved. Its reasons like that I promote your equipment so much. So you guys keep up the good work on your end and I’ll keep promoting you on mine.”