fbpx

JL3PC – Job Link® System Premium Pipe Clamp Probe

Speed? Accuracy? How about both?

Powered by Rapid Rail™ Sensor Technology.

Where to Buy

Powerful 1000′ wireless range w/no transmitter required
Needle nose to fit in tight spaces
Stabilizes in 3 seconds with +/- 1° F accuracy
1000′ wireless range
Water resistant
Communicates with Job Link App and Wireless Manifolds (SM380V/SM480V)

Job Link® System Pipe Clamp Probe – Lightning Fast and Extremely Accurate
The JL3PC pipe temperature wireless clamps feature patent pending Rapid Rail™ Sensor Technology that uses electrically conductive pipe to complete the circuit so readings stabilize in 3 seconds and are not affected by ambient air. One beep with a slow green blinking light indicates a closed circuit.  If the pipe is corroded the circuit will be open and will not read temperature.  The clamp will indicate the open loop with a double beep and rapid blinking light.  Simply clean the pipe to enable the circuit to be closed and allow fast readings with +/- 1° F accuracy.

  • LED and beep indicate accurate connection
  • Ambient air conditions do not affect measurements
  • Narrow jaw connects in tight spaces
  • Water resistant

1000′ Wireless Range
Connect pipe clamps directly to the Job Link app, or connect directly to the new SM380V or SM480V refrigerant manifolds.  There is no JL2 transmitter required for either application.

Probes are sold as individuals on it kits: Job Link® System Probes Charge Kit, or Job Link® System Charge and Air Kit.

Includes:

  • Job Link Premium Pipe Clamp Probe
  • 2 x AAA Batteries
  • Emery Cloth for Cleaning Pipes
  • Operator’s Manual
  • 1 Year Limited Warranty

Read More

Specifications User Manuals Print Material FAQs

Want to take your speed and accuracy to the next level? Find a distributor.

Where to Buy

JL3PC – Job Link® System Premium Pipe Clamp Probe

Speed? Accuracy? How about both?

Powered by Rapid Rail™ Sensor Technology.

Powerful 1000′ wireless range w/no transmitter required
Needle nose to fit in tight spaces
Stabilizes in 3 seconds with +/- 1° F accuracy
1000′ wireless range
Water resistant
Communicates with Job Link App and Wireless Manifolds (SM380V/SM480V)

Job Link® System Pipe Clamp Probe – Lightning Fast and Extremely Accurate
The JL3PC pipe temperature wireless clamps feature patent pending Rapid Rail™ Sensor Technology that uses electrically conductive pipe to complete the circuit so readings stabilize in 3 seconds and are not affected by ambient air. One beep with a slow green blinking light indicates a closed circuit.  If the pipe is corroded the circuit will be open and will not read temperature.  The clamp will indicate the open loop with a double beep and rapid blinking light.  Simply clean the pipe to enable the circuit to be closed and allow fast readings with +/- 1° F accuracy.

  • LED and beep indicate accurate connection
  • Ambient air conditions do not affect measurements
  • Narrow jaw connects in tight spaces
  • Water resistant

1000′ Wireless Range
Connect pipe clamps directly to the Job Link app, or connect directly to the new SM380V or SM480V refrigerant manifolds.  There is no JL2 transmitter required for either application.

Probes are sold as individuals on it kits: Job Link® System Probes Charge Kit, or Job Link® System Charge and Air Kit.

Includes:

  • Job Link Premium Pipe Clamp Probe
  • 2 x AAA Batteries
  • Emery Cloth for Cleaning Pipes
  • Operator’s Manual
  • 1 Year Limited Warranty

Specifications

  • Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or Android™ 5.0 (Latest compatibility at www.fieldpiece.com)
  • Pipe Contact Surface Compatibility: Electrically conductive
  • Pipe Size Compatibility: 1/4″ to 1 3/8″ (6.4mm to 34.9mm) OD
  • Sensor Type: Rapid Rail™ thermocouple (nickel chromium / nickel aluminum)
  • Measurement Feedback: Beeper and LED
  • Measurement Range: -50°F to 257°F (-46°C to 125°C)
  • Plastic body and wire insulation are designed to withstand a maximum continuous temperature of 257°F (125°C).
  • Stabilization Time: 3 seconds typical
  • Accuracy: ±1.0°F (±0.6°C)*
  • Battery Type: 2 x AAA, NEDA 24A, IEC LR03
  • Battery Life: 150 hours typical alkaline – LED blinks red when battery replacement is needed
  • Auto Power Off: 2 hours (APO can be disabled)
  • Wireless Range: 1000 feet (305 meters) line of sight. Obstructions affect distance.
  • Radio Frequency: 2.4 GHz
  • Operating Environment: -4°F to 122°F (-20°C to 50°C) at <75% RH
  • Storage Temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with batteries removed)
  • Temperature Coefficient: 0.1 x (specified accuracy) per 1.8°F (32°F to 64°F, 82°F to 122°F), per 1°C (0°C to 18°C, 28°C to 50°C)
  • Weight: 0.33 lbs (150 g)
  • Water Resistant: Designed to IP55

*Meets California’s Title 24 requirements

  • What is the range?

    • 1000 FT line of sight

  • Why does it show open when pipe clamp is closed?

    • The pipe that the clamp is on may to need to be cleaned. Remove the clamp and use the Emory cloth provided to clean the pipe and put clamp back on.

  • Why are my temperature extreme (1000+F)?

    • The probes update at a rapid speed between opening/closing , it uses an extreme value to deter the possibility of catching a miscalculation. It should go back to its actual temperature within seconds

  • Why am I not getting a superheat or subcooling measurement?

    • There are three possibilities.

      1. No pressure probe connected
      2. No pipe clamp connected
      3. No refrigerant selected
  • I have a 2-stage system, can I see both compressors at the same time?

    • Yes, hook up the probes you will be using and push the blue serial number next to the probe you would like to switch and select the probe you would like to see.