BREA, Calif.-- Fieldpiece Instruments introduces the HS33, a digital stick meter specifically designed for HVAC/R technicians. Snap on any of Fieldpiece’s optional accessory heads to measure most parameters needed by the HVAC/R technician. Accessory heads can also be connected to the meter using the removable-tip test leads for “remote” testing.
"This is the fifth major new product we have developed for the HVAC/R technician. Based on early feedback from customers, it’s our best!" said Rey Harju, President of Fieldpiece Instruments.
In addition to volts and ohms, the HS33 measures AC amps, temperature and capacitance for motor start/run caps. A slide-on current clamp (model ACH) and wrap-tab thermocouple (model ATB1) is included. The “wrap-tab” makes it easy to store the thermocouple wire.
Add optional accessory heads to measure CO, CO2, RH%, WB temperature, dew point, temperature (dual contact, non-contact, air), microns of mercury (vacuum gage), inches of water column (manometer), and microamps.
For convenience, the HS33 includes a non-contact AC voltage sensor that senses voltage from AC line power down to 24VAC for thermistat power. The DMM sounds a beeper and lights up a big, bright LED. Two other LEDs work in conjunction with the beeper to warn the user of high voltage and to indicate continuity.
"The HS33 by itself is the best meter on the market for the HVAC/R field service technician. With the flexibility of adding all those accessory heads, it’s unbeatable. Add to that the data logger introduced earlier that will work with all the accessory heads, and we’ve got the best line of hand held instruments for the HVAC/R technician!" says Rey Harju of Fieldpiece.
The HS33 includes the MIN/MAX function, which stores the highest and lowest reading. Use this with the accessory heads for recording the min and max during a test.
Test leads are made of fine stranded silicone insulated wire for flexibility. The probes can easily be stored in the back of the meter and the wires wrapped around the meter for fast and convenient storage. The meters are shipped with the leads wrapped around the meter in this fashion so the user can see how to store them.
The HS33 is available immediately, for $149 trade price, and can be purchased from a Fieldpiece distributor near you. The meter comes with a current clamp head, alligator clips, silicone test leads with removeable tips, and a padded 4-pocket nylon case.
Client Contact: Russell Harju – Product Manager, (714) 634.1844
Press Contact: Beverly Steinberg, (714) 777-2760
Formed in 1989, Orange County, Calif.-based Fieldpiece Instruments has become the testing tool company that HVACR professionals trust. Because Fieldpiece focuses only on the HVACR industry, all products are developed to solve real world HVACR problems. Not only do the tools have the right functions and features, but also techs can trust them to work where and when they need them, because they withstand the use and abuse techs in the HVACR field dish out. Fieldpiece constantly develops new tools that allow HVACR professionals to do more than they otherwise could, increasing the tech’s capability and billable hours. For more information please visit our website at www.fieldpiece.com or call 714.634.1844.