FacebookInstagram YouTube YouTube

JL3KR4 – Job Link® System Probes Charge Kit

Quick system checks just got quicker.

Wireless range of 1,000’.

Where to Buy

  • Directly connects to mobile device with Job Link System App
  • Captures superheat and subcooling
  • Portable, easy to use and noninvasive
  • Fast accurate temps with new Rapid Rail™ Sensor technology
  • Pressures auto calibrate at any elevation
  • Great for critically charged systems

Portable, reliable, simple.

The JL3KR4 is an easy-to-use kit that’s ideal for quick system checks that capture superheat and subcooling numbers in a non-invasive manner. Simply connect the two wireless pressure probes and pipe temperature clamps and you’ll immediately see system charge on your Job Link® System mobile app. Right away, you’ll know if the system is running properly, or if troubleshooting is needed. Since the probes work wirelessly, measurements can be taken up to 1,000’ away. 

Tools for many uses.

Each tool in the charge kit was designed for agility and speed. The pressure probe is narrow enough to squeeze into tight spaces and take instant readings. The pipe clamp is powered by our Rapid Rail™ Sensor design, so it delivers accuracy, speed and agility, even on the most awkward pipe configurations.

Powerful Wireless Signal Strength

  • 1,000’ wireless range
  • Powerful enough to go through most walk-in coolers and freezers
  • Directly transmits to your mobile device

Rapid Rail Sensor Advantages

  • Stabilizes in seconds
  • Beeper and LED indicate accurate connection
  • The Rapid Rail sensor uses pipe to complete circuit so ambient conditions don’t affect the measurement
  • Narrow jaw connects in tight spaces and on irregular pipe shapes

Reliable Pressures Regardless of Location

  • 45° angled fitting easily connects in tight spaces
  • Pressure sensors are accurate at any elevation
  • Calibrates automatically when powered on

What’s Included:

  • (2) JL3PC Job Link Premium Pipe Clamp Probes
  • (2) JL3PR Job Link Pressure Probes
  • (1) ANC18 Protective Case
  • (2) AAA Batteries Per Probe (8 Total)

Read More

Specifications User Manuals Print Material FAQs

Ready to start performing jobs at Mach speeds? Locate a distributor to pick yours up today.

Where To Buy

JL3KR4 – Job Link® System Probes Charge Kit

Quick system checks just got quicker.

Wireless range of 1,000’.

  • Directly connects to mobile device with Job Link System App
  • Captures superheat and subcooling
  • Portable, easy to use and noninvasive
  • Fast accurate temps with new Rapid Rail™ Sensor technology
  • Pressures auto calibrate at any elevation
  • Great for critically charged systems

Portable, reliable, simple.

The JL3KR4 is an easy-to-use kit that’s ideal for quick system checks that capture superheat and subcooling numbers in a non-invasive manner. Simply connect the two wireless pressure probes and pipe temperature clamps and you’ll immediately see system charge on your Job Link® System mobile app. Right away, you’ll know if the system is running properly, or if troubleshooting is needed. Since the probes work wirelessly, measurements can be taken up to 1,000’ away. 

Tools for many uses.

Each tool in the charge kit was designed for agility and speed. The pressure probe is narrow enough to squeeze into tight spaces and take instant readings. The pipe clamp is powered by our Rapid Rail™ Sensor design, so it delivers accuracy, speed and agility, even on the most awkward pipe configurations.

Powerful Wireless Signal Strength

  • 1,000’ wireless range
  • Powerful enough to go through most walk-in coolers and freezers
  • Directly transmits to your mobile device

Rapid Rail Sensor Advantages

  • Stabilizes in seconds
  • Beeper and LED indicate accurate connection
  • The Rapid Rail sensor uses pipe to complete circuit so ambient conditions don’t affect the measurement
  • Narrow jaw connects in tight spaces and on irregular pipe shapes

Reliable Pressures Regardless of Location

  • 45° angled fitting easily connects in tight spaces
  • Pressure sensors are accurate at any elevation
  • Calibrates automatically when powered on

What’s Included:

  • (2) JL3PC Job Link Premium Pipe Clamp Probes
  • (2) JL3PR Job Link Pressure Probes
  • (1) ANC18 Protective Case
  • (2) AAA Batteries Per Probe (8 Total)

SPECIFICATIONS

  • Wireless Range: 1000 feet or more (305 meters)
  • Wireless Frequency: 2.4 GHz
  • Battery: 2x AAA (included)
  • Battery Life: 150 hours typical alkaline
  • Auto Power Off (APO): 2 hours (can be disabled)
  • Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or Android™ 5.0

Job Link Pressure Probe – JL3PR

  • Connector Type: 45° Standard 1/4” NPT female flare
  • Best Accuracy: ±1 psig (±7 kPa)
  • Measurement Range: 0 to 580 psig (0 to 4000 kPa)
  • Maximum Overload: 800 psig (5500 kPa)
  • Water Resistant: Designed to IP55

Job Link Premium Pipe Clamp Probe – JL3PC

  • Pipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.
  • Accuracy: ±1°F (±0.6°C)
  • Measurement Range: -50°F to 257°F (-46°C to 125°C)
  • Stabilization Time: Three seconds typical
  • Measurement Feedback: Beeper and LED
  • Water Resistant: Designed to IP55
  • Patent: 10,365,165

 

Opman JL3PC v16 Opman JL3PC v16

Opman JL3PR v16 Opman JL3PR v16

  • What is the range of JL3PC?

    • 1000FT line of sight

  • Why does it show open when pipe clamp is closed

    • The pipe that the clamp is on may to need to be cleaned. Remove the clamp and use the Emory cloth provided to clean the pipe and put clamp back on.

  • Why are my temperature extreme (1000+F)

    • The probes update at a rapid speed between opening/closing , it uses an extreme value to deter the possibility of catching a miscalculation. It should go back to its actual temperature within seconds

  • Why am I not getting a superheat or subcooling measurement

    • There are three possibilities.

      1. No pressure probe connected
      2. No pipe clamp connected
      3. No refrigerant selected
  • I have a 2-stage system, can I see both compressors at the same time?

    • Yes, hook up the probes you will be using and push the blue serial number next to the probe you would like to switch and select the probe you would like to see.

  • What is the range of JL3PR?

    • 1000 FT line of sight

 
^