FacebookInstagram YouTube YouTube

AMN2 – Manometer

Measures Gas or Static Pressure.

Resolution down to 0.01" WC.

Where to Buy

  • Measures duct pressure to balance air flow
  • -60.0 WC tp 60.0 WC range
  • 5/16″ adapter for measuring inlet or outlet pressures

The AMN2 is a manometer accessory head for use with our modular meters (DMMs) and instruments. It measures gas pressure with enough resolution to measure static pressure. The AMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging.  The AMN2 measures pressure between -60inWC and 60inWC (inches of water column). Take static pressure measurements using the resolution mode of 0.01inWC.

The AMN2 Manometer Accessory Head offers several features and benefits to field technicians:

* Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges.
* Measure gas pressure on 3/16” and 5/16” regulator ports.
* Enough resolution and sensitivity to measure static pressure.
* ZERO Set on face of instrument.
* Auto Power-Off (APO) for data logging pressure.
* Low battery LED indicator.

What’s Included:

  • (1) AMN2 Manometer Accessory
  • (1) 3/16” Tubes with Brass Fitting
  • (1) RMA316 3/16” to 5/16” Tube Adapter
  • (1) 9V Battery (installed)

Read More

Specifications User Manuals Print Material

Buy One Today

Where To Buy

AMN2 – Manometer

Measures Gas or Static Pressure.

Resolution down to 0.01" WC.

  • Measures duct pressure to balance air flow
  • -60.0 WC tp 60.0 WC range
  • 5/16″ adapter for measuring inlet or outlet pressures

The AMN2 is a manometer accessory head for use with our modular meters (DMMs) and instruments. It measures gas pressure with enough resolution to measure static pressure. The AMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging.  The AMN2 measures pressure between -60inWC and 60inWC (inches of water column). Take static pressure measurements using the resolution mode of 0.01inWC.

The AMN2 Manometer Accessory Head offers several features and benefits to field technicians:

* Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges.
* Measure gas pressure on 3/16” and 5/16” regulator ports.
* Enough resolution and sensitivity to measure static pressure.
* ZERO Set on face of instrument.
* Auto Power-Off (APO) for data logging pressure.
* Low battery LED indicator.

What’s Included:

  • (1) AMN2 Manometer Accessory
  • (1) 3/16” Tubes with Brass Fitting
  • (1) RMA316 3/16” to 5/16” Tube Adapter
  • (1) 9V Battery (installed)

Specifications

  • Pressure Ports: Tube connector for 3/16 inch (4mm) I.D. flexible tubing
  • Units of Measure: inches of water column (“WC)
  • Accuracy: @ 73°F, <90%RH ±0.4rdg (-20 to 20”WC), applied before dividing reading by 10 on 2”WC range ±1.0rdg (-60 to -20”WC and +20 to +60”WC)
  • Resolution: 0.1 or 0.01 depending on resolution selected (If 0.01”WC resolution is selected you must divide displayed value by 10 for actual value)
  • Measurement Range: -60.0”WC to 60.0”WC
  • Operating environment: 32ºF (0°C) to 105ºF (41°C), 15-90%RH
  • Compatible media: Dry, non-corrosive gases
  • Battery: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
  • Battery Life: 150 hours, low battery LED indicator on accessory head
  • Overrange: “OL” or “-OL” is displayed
  • Auto power off: 15 minutes
  • Dimensions: ~5 3/16”(131mm) (H) x ~2 7/16”(67mm) (W) x ~1 1/4”(32mm)(D)
  • Weight: approximately 154g (~1/2 pound) including battery

AMN2 - Manometer Accessory Head AMN2 - Manometer Accessory Head

^