FacebookInstagram YouTube YouTube

ADMN2 – Dual Port Manometer Accessory Head

Static Pressure Differential Head.

Where to Buy

Measures duct pressures to balance air flow
Resolution down to 0.01″ WC for static pressure measurement
-60.0″WC to 60.0″WC range

The ADMN2 is a portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The ADMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging.  The ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The ADMN2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar.

The modular design of the ADMN2 gives it a distinct advantage over other dual-port manometers in the field.  Remoting the ADMN2 with our detachable test leads allows you to measure pressure in hard to reach places.  The included 3/16” to 5/16” adapters allow you to measure gas pressure on more makes and models of gas appliances as well.

Includes:

  • Dual-Port Manometer Accessory – ADMN2
  • 2 – 3/16” Tubes with Brass Fittings
  • 2 – 3/16” to 5/16” Tube Adapters – RMA316
  • 9V Battery (installed)
  • Operator’s Manual

Read More

Specifications User Manuals Print Material

Buy One Today

Where To Buy

ADMN2 – Dual Port Manometer Accessory Head

Static Pressure Differential Head.

Measures duct pressures to balance air flow
Resolution down to 0.01″ WC for static pressure measurement
-60.0″WC to 60.0″WC range

The ADMN2 is a portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The ADMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging.  The ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The ADMN2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar.

The modular design of the ADMN2 gives it a distinct advantage over other dual-port manometers in the field.  Remoting the ADMN2 with our detachable test leads allows you to measure pressure in hard to reach places.  The included 3/16” to 5/16” adapters allow you to measure gas pressure on more makes and models of gas appliances as well.

Includes:

  • Dual-Port Manometer Accessory – ADMN2
  • 2 – 3/16” Tubes with Brass Fittings
  • 2 – 3/16” to 5/16” Tube Adapters – RMA316
  • 9V Battery (installed)
  • Operator’s Manual

Specifications

  • Pressure Ports: Two tube connectors for 4mm (3/16 inch) I.D. flexible tubing
  • Units of Measure: inWC and mbar
  • Accuracy:
    ±0.02inWC, ±(0.00inWC to 2.00inWC);
    ±1.5% FS, ±(2.00inWC to 60.0inWC);
    ±0.05mbar, ±(0.00mbar to 5.00mbar);
    ±1.5% FS, ±(5.00mbar to 150.0mbar)
    Resolution: 0.1 or 0.01 depending on resolution selected (If 0.01 resolution is selected you must divide displayed value by 10 for actual value)
  • Measurement Range:
    inWC: -60.0 to 60.0
    mBar: -150.0 to 150.0
  • Operating environment: 32ºF (0°C) to 122ºF (50°C), under 75%RH
  • Compatible media: Dry, non-corrosive gases
  • Battery: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
  • Battery Life: 100 hours with low battery LED indicator on accessory head.
  • Overrange: “OL” or “-OL” is displayed
  • Auto power off: 15 minutes
  • Dimensions: 131mm(~5 3/16”)(H) x 67mm(~2 7/16”)(W) x 32mm(~1 1/4”)(D)
  • Weight: approximately 154g (~1/2 pound) including battery