Fieldpiece Instruments

New! HS36 Stick Meter Video

New! HS26
Original Stick DMM

Just snap the head onto meter or use the deluxe silicone leads for remote connection.

Non-contact Voltage (HS30's)
Loud beeper and bright LED indicate the NCV tab is near AC voltages down to 24VAC.
True RMS (HS36)
Get the true voltage and amperage when testing variable speed fans or other non-sine wave applications.
Auto-ranging (HS35,HS36)
Automatically changes range for best resolution.
Temperature (HS30's)
Thermocouple plugs in directly for accurate readings, even in fast changing environments.
Microamps (HS26,HS35,HS36)
For flame rectifier diode tests.
Capacitance
For motor-run and motor-start capacitors.
Frequency (HS35,HS36)
For variable frequency drives.
Rugged rubberized case with
magnetic hanger (HS30's).
Hi-voltage indicators you can’t miss--both LED and beeper turn on to indicate you’ve touched a potentially dangerous voltage.
Continuity indicated by LED and beeper.
MAX hold automatically holds reading so you can look at the meter after you’ve disconnected.
Low ohms ranges for motor windings and mid range for thermistors.
HS36 comes with a backlight.
Auto-power off to extend battery life.
UL Cat III 600V.

Hang It
For safe and easy testing, hang the meter using the magnetic hanger.

Safe voltage
For maximum safety, clip one lead to ground and test with one hand.

Remote It
For hard to reach test points, remove the probe tips and connect to ACH current clamp head.

HS26 - HS33 - HS35 - HS36 Unique Features for HVAC/R
	Test Lead Solutions
	Probe storage in the back. Just snap them in (HS30's). Removable probe tips for connection to most accessory heads. Attach detachable probe tip directly into jack for easy and safe voltage testing. Silicone wire test leads remain flexible in cold weather, withstand caustic chemicals, and work well in temperatures that will melt vinyl leads. Leads conveniently wrap around meter (HS30's).
	What's Included
	Every HS30 series meter comes packaged inside the padded ANC1 4-pocket case. A 400AAC clamp head (ACH4) is included. Just slide the clamp onto the top of the HS30 series meter to read amps. Also included are deluxe silicone test leads, alligator clips, k-type thermocouple, battery (installed), and operator’s manual.
	HS26 comes packaged inside the padded ANC7. A 400AAC clamp head (ACH4) is included. Just slide the clamp onto the top of the HS26 meter to read amps. Also included are deluxe silicone test leads, alligator clips, battery (installed), and operator’s manual.

Click on any one of the meters on the right for a larger view.

HS26

HS33

HS35

HS36

Specifications
Function	Range	Accuracy/Resolution	HS26	HS33	HS35	HS36
AC Conversion			Average	Average	Average	True RMS
Ranging			Manual	Manual	Auto	Auto
Counts			2000	2000	4000	4000
Bargraph					X	X
Backlight						X
VAC	200m	1.2%+3/0.1m	X	X	D	D
	2000m	1.5%+5/1m	X		D	D
	40	1.5%+5/0.01			X	X
	200	1.5%+5/0.1	X	X	D	D
	600	2%+5/1	X	X	D	D
VDC	200m	0.5%+2/0.1m	X	X	D	D
	2000m	0.5%+2/1m	X	X	D	D
	20	0.5%+2/0.01			D	D
	200	0.5%+2/0.1	X	X	D	D
	600	0.5%+2/1			X	X
AAC	20	2.7%+ 7/0.1	A	A	A	A
	100	3.7%+ 8/0.1	A	A	A	A
	400	5.0%+ 10/1	A	A	A	A
ADC	200µ	1%+2/0.1µ	X
	400µ	1%+1/0.1µ			X	X
	4000µ	1%+1/1 µ			X	X
°F	200°F	1°F/0.1		X	D	D
	1000°F	1°F/1			X	X
MFD	200	3%+5/0.1m	E	X	D	D
Hi-V indicator		>30V	C	C	C	C
NCV		>24VAC		C	C	C
Ohms	200	1%+4/0/1	F	X	D	D
	4K	1%+4/1			X	X
	40K	1%+4/10			X	X
	200K	1%+4/100		X	D	D
	4M	1.5%+4/1K			X	X
	20M	3%+5/10K			D	D
Continuity			C	C	C	C
Diode			X	X	X	X
HZ					X	X
A. With ACH clamp head
B. Beeper
C. LED and beeper
D. Range is 40XX, instead of 20XX
E. Accuracy / Resolution is 200 MFD 3.0%+3/0.1 MFD
F. Accuracy / Resolution is 200 Ohms 1.0%+3/0.1 Ohms