Client Contact:   
Rey Harju
(714)  257-9060
fpinfo@fieldpiece.com

       
Press Contact:
Beverly Steinberg
(714) 777-2760

GBL@speakeasy.net

Fieldpiece Instruments' New HS33 Digital Stick Meter for HVAC/R

BREA, Calif.-- Fieldpiece Instruments introduces the HS33, a digital stick meter specifically designed for HVAC/R technicians. Snap on any of Fieldpiece’s optional accessory heads to measure most parameters needed by the HVAC/R technician. Accessory heads can also be connected to the meter using the removable-tip test leads for “remote” testing.  

"This is the fifth major new product we have developed for the HVAC/R technician. Based on early feedback from customers, it’s our best!" said Rey Harju, President of Fieldpiece Instruments.

In addition to volts and ohms, the HS33 measures AC amps, temperature and capacitance for motor start/run caps. A slide-on current clamp (model ACH) and wrap-tab thermocouple (model ATB1) is included. The “wrap-tab” makes it easy to store the thermocouple wire.

Add optional accessory heads to measure CO, CO2, RH%, WB temperature, dew point, temperature (dual contact, non-contact, air), microns of mercury (vacuum gage), inches of water column (manometer), and microamps.

For convenience, the HS33 includes a non-contact AC voltage sensor that senses voltage from AC line power down to 24VAC for thermistat power. The DMM sounds a beeper and lights up a big, bright LED. Two other LEDs work in conjunction with the beeper to warn the user of high voltage and to indicate continuity.  

"The HS33 by itself is the best meter on the market for the HVAC/R field service technician. With the flexibility of adding all those accessory heads, it’s unbeatable. Add to that the data logger introduced earlier that will work with all the accessory heads, and we’ve got the best line of hand held instruments for the HVAC/R technician!" says Rey Harju of Fieldpiece.

The HS33 includes the MIN/MAX function, which stores the highest and lowest reading. Use this with the accessory heads for recording the min and max during a test.  

Test leads are made of fine stranded silicone insulated wire for flexibility. The probes can easily be stored in the back of the meter and the wires wrapped around the meter for fast and convenient storage. The meters are shipped with the leads wrapped around the meter in this fashion so the user can see how to store them.

The HS33 is available immediately, for $149 trade price, and can be purchased from a Fieldpiece distributor near you. The meter comes with a current clamp head, alligator clips, silicone test leads with removeable tips, and a padded 4-pocket nylon case.

Fieldpiece products are sold exclusively through authorized Fieldpiece distributors.  For the Fieldpiece distributor closest to you, or to receive a complete price list of all Fieldpiece field service accessories, contact Pat Clausen at Fieldpiece Instruments, 580 W. Central Ave. Unit #A, Brea, CA 92821. Tel. (714) 257-9060; Fax (714) 257-9069; e-mail: fpinfo@fieldpiece.com; web site: www.fieldpiece.com. 

Fieldpiece Instruments, Inc. was formed in 1989 to provide instruments and instrument kits for field service technicians. Fieldpiece designs products and assembles instrument kits in the U.S. Kit components are manufactured in the U.S. and overseas.

Back to Press Releases

Fieldpiece Instruments, Inc.
580 W. Central, Suite A
Brea, CA 92821
(714) 257-9060 FAX (714) 257-9069
fpinfo@fieldpiece.com