BREA,
Calif., April 14, 2006 -- Fieldpiece Instruments, manufacturer of professional-grade
instruments for the HVAC/R technician, has introduced an upgraded version
of the company’s popular LT17 DMM. The LT17A features a bright
blue backlight display; a magnetic hanger on the back for testing convenience;
a temperature calibration pot on the face of the meter for easy ice
bucket calibration; and a newly tooled case featuring a rugged front-overhang
design and a protective rubber holster. The LT17A also comes with the
new ACH4 current clamp that is designed to make it easy to separate
and grab just one wire from a bundle. Removable tip test leads are included
to connect with all Fieldpiece accessory heads.
“The LT17 has been an important component in our growing line
of meters and the new features in the LT17A provide greater functionality
for the HVACR technician when testing,” said Rey Harju of Fieldpiece.
“For basic HVAC and electrical testing in the field, the LT17A
is the biggest bang for the buck!”
In addition to volts and amps, the LT17A measures functions specifically
needed by the HVAC/R technicians, such as temperature, MFD (motor start
and run capacitors), ohms (motor windings), and microamps (flame rectifier
diode circuit). Motor run and start capacitors are two of the most failure-prone
components in an HVAC/R system. The LT17A features ranges not commonly
available on digital multimeters priced below $129. The four millivolt
ranges (200mV and 2000 mV AC and DC) enable the LT17A to use all Fieldpiece
accessory heads. The AC and DC voltages cover ranges from 200mV to 600V
with a resolution of 0.1mV. The LT17A measures temperature with a supplied
K-type thermocouple (and other optional K-type thermocouples) for ranges
from -30°F to 1400°F. The thermocouple plugs directly into the
front of the meter.
The LT17A has a host of other features like Data Hold, Min/Max Hold,
a continuity beeper, automatic shut-off and a low-battery indicator.
The LT17A can be conveniently propped up with the built-in tilt stand
or it can hang from a steel panel with the magnetic hanger. The built-in
lead storage keeps the leads tidy when not in use.
The LT17A is priced at $129 and comes with the new ACH4 Current Clamp,
ATB1 Thermocouple, vinyl deluxe leads with removable tips, and an ANC5
Case.
Fieldpiece products are sold exclusively through authorized Fieldpiece
distributors. For the Fieldpiece distributor closest to you, or to receive
a complete price list of all Fieldpiece field service accessories, contact
Pat Clausen at Fieldpiece Instruments, 580 West Central Avenue, Suite
A, Brea, CA 92821. Tel. (714) 257-9060; Fax (714) 257-9069; e-mail:
fporders@fieldpiece.com; web site: www.fieldpiece.com.
Fieldpiece Instruments, Inc. was formed in 1989 to provide instruments
and instrument kits for field service technicians. Fieldpiece designs
products and assembles instrument kits in the U.S. Kit components are
manufactured in the U.S. and overseas.
Back
to Press Releases
Fieldpiece
Instruments, Inc.
580 W. Central, Suite A
Brea, CA 92821
(714) 257-9060 FAX (714) 257-9069
fporders@fieldpiece.com |
