Pocket Tools
From sleek LED extension mirrors and magnets to mini IR thermometers, shirt pocket flashlights, even a basic DMM about the size of a wallet, like all of our products, our pocket tools are designed to help make your job easier, safer and faster. They can also be a lifesaver when you drop a part in that little opening between the basement wall and the unit that hasn’t seen light since the system was installed. There are a lot of quality products packed on this page, but it’s definitely worth the time to check them out.



Digital Psychrometer - PRH2

For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have for every HVACR professional.  Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and measurements can be taken either in the duct, or while walking around. 
MDSH1-SRC-product-tmb

Magnetic Parts Dish - MDSH1

This hanging magnet for parts and screws is a great addition to any parts bench and an even better performer in the field. Hang it on the side of a unit or any magnet-compatible metal surface. Right side up, upside down, vertically, it doesn’t matter. The MDSH1 holds screws, tools and more firmly in place and out of the way while you work. It combines a strong magnet with a chrome-finish dish featuring our logotype.

 
PAL1-SRC-product-tmb

Alligator Clip Extension Tool - PAL1

Makes lighting pilots a breeze even in under-floor mounted furnaces. Holds a match stick and extends to 24-inches. Chrome finish and pocket clip.

 
PBS2-SRC-product-tmb

Magnetic Parts Grabber - PBS2

This parts grabber has a strong magnet with a clawed hand gives your arm a 24-inch extension to grab out of reach parts. The claw helps you hook on to the parts for that little bit of extra force to get them moving out from under a unit. The magnet hangs onto them. Works as a great back scratcher too (we’re not kidding). Sleek chrome finish and pocket clip look good in your pocket when not in use.

 
PLF2-SRC-product-tmb

Pocket LED Flashlight - PLF2

Don’t get caught in the dark again. Keep the PLF2 in your shirt pocket. This compact yet bright LED flashlight packs a lot of power. The PLF2 puts out the same amount of light you’d expect from a much larger flashlight. Besides the brightness, the best thing about it is its size. Under 5-inches long.

 
The PLM2 mirror adjusts in any direction and makes viewing in tight places possible. The bright LED reflects light off the mirror to shine where you need it. Detach the mirror and use as a standalone flashlight.

Lighted Mirror Extension Tool - PLM2

The mirror adjusts in any direction and makes viewing in tight places possible. The bright LED reflects light off the mirror to shine where you need it. Detach the mirror and use as a standalone flashlight. A new threaded connection keeps light securely turned off when not in use. Read part numbers off the back of a unit, only inches from the wall. A must have for any technician who works in dark areas. The chrome finish makes it look almost as good as it works.

 
PMG2-SRC-product-tmb

Lighted Magnet Extension Tool - PMG2

We’ve all dropped screws and parts in the dark, sometimes even our keys end up behind a unit. And that can cost you a lot of precious time on a service call. Problem solved. Pick them up with our new lighted magnet extension tool. This tool has a bright LED flashlight that shines through a donut-hole in the magnet. Don't let the magnet’s size fool you, it has the power to hold and lift (carefully) up to 3.65 lbs. in our non-scientific warehouse tests. New threaded connection keeps light securely turned off when not in use. Excellent for anyone who's ever dropped a screw or bolt on the on a job, especially in dark places.

 
SIG1-SRC-product-tmb

Gun Style IR Thermometer - SIG1

Among our most popular IR thermometers the SIG2 Gun-Style Thermometer features a 10:1 field of view. A bright blue backlight and laser guide make taking fast and accurate temperature readings easier, better and faster. The SIG1 comes with a protective lens cap and body wrap. It works faster than thermistor-based temperature instruments and has a range of -22°F to 1022°F. Includes Auto-Power Off to conserve battery life.

 
The SIL2 is among our most accurate IR thermometers. With a 1:1 field of view and a protective IR lens cap, the SIL2, is as small as a pen and delivers big results.

Pen Style IR Thermometer with LED Flashlight - SIL2

The SIL2 is among our most accurate IR thermometers. With a 1:1 field of view and a protective IR lens cap, the SIL2, is as small as a pen and delivers big results. Features automatic data hold, measurements in °F or °C, and has excellent accuracy: ±1.5°F and a resolution of 0.5°F. The SIL2 has a range of -27°F to 230°F and includes Auto-Power Off (APO) to conserve battery life.
SIP2-SRC-product-tmb

Shirt Pocket IR Thermometer - SIP2

The SIP2 is among the most compact IR thermometers in the HVAC/R industry. With a 1:1 field of view, the, compact design makes taking accurate temperature readings easier, better and faster. The SIP2 has a 1°F resolution and the IR sensor is faster than thermistor-based thermometers. Although small in size the SIP2 has a -22°F to 230°F temperature range and features Auto-Power Off (APO) to conserve battery life. Come with a neck band or pocket clip so you always have accurate temperature readings close by.
 
SIR2-SRC-product-tmb

Infrared Thermometer with Laser Sight - SIR2

The SIR2 Infrared Pocket Thermometer with Laser Sight is among our most popular IR thermometers. It conveniently fits in a shirt pocket and boasts a 6:1 field of view. The laser guide helps you aim at the target with a reaction time much faster than thermistor based thermometers. Use it immediately after pulling from it from your pocket. A favorite among HVAC/R professionals with a range of -27°F to 482°F.
With a 24VAC to 440VAC range of the SNCV1 offers technicians the ability to test thermostats and other HVAC/R parameter easily.

Non-contact Voltage Detector - SNCV1

This non-contact voltage detector features an analog feel. The closer the probe is to the voltage source, the louder and brighter the indicators become. Detects AC voltages without contact and features a bright red LED light and buzzer. With a 24VAC to 440VAC range of the SNCV1 offers technicians the ability to test thermostats and other HVAC/R parameter easily. Clips to your shirt pocket and is a quick source to find out whether that line is hot or not.
SPDM1-SRC-product-tmb

Pocket DMM - SPDM1

The SPDM1 features non-contact voltage and include many of the parameters you use every day for HVAC/R field service. The leads store in the back of the body of the instrument. Measures volts AC/DC, ohms, continuity and includes a diode check. A great backup meter and a solid performer in the field.

 
SPK1-SRC-product-tmb

Pocketknife Style Thermometer - SPK1

The SPK1 Pocket Knife Style Thermometer features a sharp tip for punching through flex duct and hangs easily from a vent or thermostat. Pull out the probe rod just like you would a pocketknife. 16 detent position grooves hold the rod at virtually at any angle. The probe rod folds away simply with no cover sleeve to lose. Temperature range: -58°F to 392°F. One of our most popular instruments for HVAC/R field service.
The SWT2 Water Resistant Thermometer features a sealed body for field service and a fixed, sharp tip for punching through flex duct.

Water Resistant Thermometer – SWT2

The SWT2 Water Resistant Thermometer has a fixed probe tip with a protective cover. Features a sealed body for field service and a sharp tip for punching through flex duct. The SWT2 has a temperature range of -58°F to 392°F and has a MAX/MIN function to check temperatures without having to keep an eye in the display. A pocket clip, ergonomic shape and easy to read LCD make measuring temperatures easier, better and faster. With a -58°F to 392°F temperature range and the Auto-Power Off function to conserve battery life, the SWT2 is a smart choice for HVAC/R field service.