Fieldpiece’s New Pipe Clamp Thermocouples Offer Easy Access and Fast, Accurate Readings for Pipe Temperature Measurement
BREA, Calif.-- Fieldpiece Instruments announces the introduction of three new thermocouple pipe clamps. Each has been specially designed to take pipe temperatures easily and accurately. All three K-type thermocouples will work with instruments that include a k-type thermometer, including Fieldpiece’s HS30 stick meter and SC60/70 clamp meters and Fieldpiece’s ATH4 dual temperature accessory head.
The ATC1 thermocouple accessory is designed with a spring-loaded clamp to firmly hold the thermocouple junction up against a pipe, typically for suction line temperature measurements. It features a big jaw opening enabling easy connection to pipe diameters (OD) of 1 1/4”. The ATC1’s clamp-on design allows the technician to attach it directly onto the pipe from the front. For larger pipes, the ATC2, big brother to the ATC1, features a 2 1/4” large jaw opening. At suggested list prices of $49 and $64.95, the ATC1 and ATC2 are very low cost. Both feature a patent-pending thermocouple sensor that is thermally isolated so it measures the temperature quickly and accurately.
The ATC3 has a more sophisticated design for connecting to a pipe and the thermocouple is even better isolated. The ATC3 can be connected to a pipe with a diameter up to 1 3/8".
All three pipe clamp thermocouples can greatly facilitate taking a superheat or subcooling measurement on most residential and commercial refrigeration appliances or air conditioners. All three pipe clamp thermocouples can be used with any thermometer, which accepts a K-type thermocouple.
“The new thermocouples were designed with the goal of making the field service technician’s job easier,” said Ray Harju of Fieldpiece. “The ATC1 and ATC2 pipe clamp fits in places other units can’t and the ATC3 makes readings faster than ever.”
The ATC1, ATC2, and ATC3 are available immediately and priced at $49, $64.95, and $109 respectively. Fieldpiece also offers a wide variety of K-type thermocouples for field service technicians with an alligator clip design.
Client Contact: Russell Harju – Product Manager, (714) 634.1844
Press Contact: Beverly Steinberg, (714) 777-2760
Formed in 1989, Orange County, Calif.-based Fieldpiece Instruments has become the testing tool company that HVACR professionals trust. Because Fieldpiece focuses only on the HVACR industry, all products are developed to solve real world HVACR problems. Not only do the tools have the right functions and features, but also techs can trust them to work where and when they need them, because they withstand the use and abuse techs in the HVACR field dish out. Fieldpiece constantly develops new tools that allow HVACR professionals to do more than they otherwise could, increasing the tech’s capability and billable hours. For more information please visit our website at www.fieldpiece.com or call 714.634.1844.