|
 User's Manual
Features and Benefits
Competitive Advantages
What's Included?
Recommended
Specifications
What is It?
The Fieldpiece Digital Megohm Meter, model SMG5, is a compact standalone meter designed for checking HVAC compressor insulation. The SMG5 provides a 1000V voltage source, monitors current, and displays the resistance between the test points. Maximum current output is <1mA. It can be used to determine the condition of insulation from winding to ground in a motor, compressor, or transformer. Includes a case, alligator clip lead tip and leads with removable tips.
How Does it Work?
Disconnect the windings and measure the resistance between the windings and ground through the insulation. Determine what a "good" reading is by comparing your reading to values supplied by the manufacturer of the equipment or from your own experience.
Noticing decreasing insulation resistance levels can forecast problems before catastrophic failure.
Why a Digital Multimeter (DMM) Often Isn't Enough To test resistance, a DMM supplies low voltage (<1V) to the test points and is capable of delivering only a few milliamps. It's not a high enough voltage to detect high resistance problems that might indicate moisture and other contaminants and it's not enough current to measure lower values of resistance.
For your safety.
- Connect the E terminal to ground using the alligator clip (included).
- Use one hand to conduct test.
- Make sure to turn meter OFF to avoid accidentally pressing MEAS and creating a 1000V voltage source. If the switch is ON and MEAS is depressed, 1000V will appear on the terminals.
Features and Benefits
Designed for HVAC/R, the Digital Megohm Meter, model SMG5 is a compact, low cost meter for checking compressor insulation.
- Predict compressor failure.
- 1000VDC stresses insulation to measure up to 2000Mohms.
- Backlit LCD display.
- Auto-off to extend battery life.
- Case, alligator clip, leads with removable tips.
Competitive Advantages
The Fieldpiece Megohm Meter, model SMG5, is in a class of it’s own. It’s affordable and was designed with your safety in mind. When used properly, detachable lead tips and probes along with and alligator lead tip allow for one-handed testing. The compact, slim shape allows for easier testing as well. Auto power off (APO) conserves battery life.
What's Included
- Megohm Meter – SMG5
- (2) Probe tips
- (1) Ground lead with detachable tip
- (1) Alligator probe tip
- Carrying Case
- (4) 1.5V(AAA) batteries (installed)
- Operator’s manual
|
|
Recommended Accessories and Replacement Parts
Technicians who like the SMG5 may also enjoy these instruments and accessories:
|

|
Expandable True RMS Stick Multimeter with Backlight - HS36
Our top of the line True RMS Stick Meter, the HS36 includes the ranges you use everyday for HVAC/R field service plus includes a bright blue backlight and True RMS. Like the rest of the HS30 series, the HS36 comes equipped with a magnetic hanger, along with detachable silicone test leads and alligator clip probe tips for remote and easy one-handed testing, as well as the full set of built-in safety features. This auto-ranging stick meter also includes a bar graph on the LCD for an analog feel. Technicians who prefer our expandable stick meters tell us this is the best digital multimeter for HVAC/R field Service.
Read More.. |
|

|
HVAC Guide® System Analyzer - HG2
The HVAC Guide® System Analyzer, model HG2, is the next generation hand-held diagnostic instrument that guides field technicians step-by-step through the most common and important HVAC system tests including: Target Evaporator Exit Temperature (delta T, evaporator drop, drop across the coil), Target Superheat, Superheat, Subcooling, Combustion Analysis and now the CheckMe!® test.
Read More..
|
|

|
Diagnostic Digital Sling Psychrometer – SRH2
The SRH2 Diagnostic Psychrometer performs all the normal functions of a digital psychrometer plus it calculates critical A/C system targets from psychometric measurements. It measures temperature (DB) and %relative humidity (%RH) and calculates wet bulb (WB) and dew point (DP). The SRH2 goes a step further than traditional digital psychrometers in that it also calculates target superheat and target evaporator exit temperature (delta T, drop across the coil, evaporator drop, temperature split) with built-in charts and the psychometric measurements. It’s the only digital psychrometer that takes measurements using an electronic sensor (NTC) or k-type thermocouples (T/C).
Read More..
|
|

|
Optical Laser Tachometer – SRPM2
The Fieldpiece Optical Laser Tachometer, model SRPM2, is a non-contact tachometer that measures revolutions per minute on any spinning surface. It is designed to measure RPM or total count (total number of revolutions) on air conditioning and heating system blower motors and fans. An RPM reading out of spec can tell you that your wiring may need attention or that a motor is not running at maximum efficiency. It works up to four feet away and includes reflective tape required for testing. Replacement reflective tape is available from your favorite distributor (model RREF16).
Read More..
|
Specifications
TECHNICAL SPECIFICATIONS Display: 3 1/2 digit liquid crystal display (LCD) with maximum reading of 1999. Overrange: (OL) or (-OL) is displayed. Low battery indication: The battery symbol is displayed when the battery voltage drops below the operating level. Measurement rate: 2.5 times per second, nominal. Operating Environment: 0°C to 40°C at < 70% relative humidity. Storage Temperature: -20°C to 60°C, 0 to 80% R.H. with battery removed from meter. Auto power off: 15 seconds approx. Standby consume current: <10μA Battery: 4 pcs 1.5V (AAA size) UM-4 R03. Battery Life: 4 hours (continuity) typical with alkaline battery (@20cΛ range test 10cΛ resistor). Dimensions: 170mm(H) x 44mm(W) x 40mm(D). Weight: 160g including batteries.
ELECTRICAL Range: 20 ΜΩ, 2000 ΜΩ. Resolution: 10K Ω on 20ΜΩ range, 1 ΜΩ on 2000 ΜΩ range. Accuracy: 20 ΜΩ range: ±(2%rdg + 2dgts) 2000 ΜΩ range: <500ΜΩ ±(4%rdg + 2dgts) >500 ΜΩ ±(5%rdg + 2dgts) Rated voltage: DC-DC converter to 1000VDC Accuracy temperature: 23°C ± 5°C less than 70%RH Temperature Coefficient: 0.1X (specified accuracy)/°C (28°C)
|