AC Line Splitter - ALS1
The ALS1 AC Line Splitter has a three-wire plug for grounded circuits and is designed for use with clamp meters. It features a X10 loop for accurate low current measurements and can handle a load of  up to 15 AAC. It also includes contacts for easy voltage measurements.  Save yourself the time of removing the contact plate or dismantling an outlet box. Put an ALS1 in your service bag.

Manual Flue Pump with Trap - AOXP2
The AOXP2 Manual Flue Pump with Trap is included with our Combustion Check meters and is an optional accessory for testing flue CO with our Carbon Monoxide Detectors. Features a water and contaminant trap to help maximize sensor life. A newly designed bulb stands up to the rigors of flue testing and manual pumps work better in cold weather than electronic pumps.

Static Pressure Probes - ASP2
The ASP2 Static Pressure Probe two-pack makes taking static pressure measurements in ductwork easier, faster and more accurate than using manometer tubes alone.  Features a magnetic flange and directional arrow for hands free use and to ensure proper positioning and optimal performance.  Works with all Fieldpiece manometers.

Replacement AOXP2 Water Trap - ATRAP2
While our hand pump is built to last for years, a mishap can ruin your work day. We've got you covered with this replacement water trap. The ATRAP2 is the whole water trap replacement assembly for our manual hand pump model AOXP2.  Plan ahead and keep an extra one in your bag.

Replacement Parts Bag for AOXP2 - RAOX9
Maximize the sensor life on your Fieldpiece combustion testing equipment. Change the water trap filters and O-rings when you see signs of wear to keep your meter sensors clean and contaminant free. The RAOX9 comes with replacment water traps, O-rings and replacement thermocouple clips.

Car Charger for SRL2K7 and SRL8 - RCA2
With all the chargers and plugs you have in your service van, one is bound to get left behind, borrowed indefinitely by a co-worker or lost. Whether you need a replacement or an extra charger for your Fieldpiece refrigerant leak detector, the RCA2 will keep you in business when you're on the road. Powers models SRL2K7 and SRL8 while charging.

Replacement USB Cable for DL2/DL3 - RCBLDL5
Think for a minute about you PC workstation or laptop.  There's a cable for your phone, PDA, camera and of course, your test instruments. The RCBLDL5 is a replacement cable for Fieldpiece data logger models DL2 (USB model) and DL3.  Get an extra and keep one in the service vehicle and one in the office.

9-inch Flexible Leak Detector Wand Extension - RFE2
This wand connects to the end of the original snoot on your Fieldpiece refrigerant leak detector to give you greater reach in and around tight places. It is included with Fieldpiece refrigerant leak detector models SRL2K7 and SRL8, along with our ABMK3 blow molded case.

Replacement Filters and O-rings for Fieldpiece Refrigerant Leak Detectors - RFL2
Fieldpiece filters and O-rings are designed to help protect your refrigerant leak detector sensor and keep it working properly. When the filter swells up and blocks water and other contaminants from reaching the sensor, it's done its job, and it's time for a replacement. You'll find the RFL2 Replacement Filter and O-ring pack at your favorite Fieldpiece distributor.

Replacement Heated Diode Refrigerant Sensor for SRL8 - RHD1
Although our heated diode refrigerant leak detector sensor is designed to last up to five years with normal use, our meters generally last a lot longer. This replacement sensor is for the Fieldpiece Heated Diode Refrigerant Leak Detector, model SRL8 and is available from your favorite Fieldpiece distributor.

9-inch Rigid Leak Detector Wand Extension - RRE2
Connect this rigid wand to the end of the original snoot on your Fieldpiece refrigerant leak detector to give you greater reach in and around tight places.  A great tool for testing A-coils and seals. It is included with Fieldpiece refrigerant leak detector models SRL2K7 and SRL8, along with our ABMK3 blow molded case.

Replacement Reflective Tape for SRPM2  - RREF16
The RREF16 replacement reflective tape pack works with our Optical Laser Tachometer model SRMP2. Use according to refector instructions found in the SRMP2 operator's manual.

Wall Charger for SRL2K7 and SRL8 - RWA2
Your Fieldpiece leak detector came with a wall and car charger but that doesn't mean you still have one. Whether you need a replacement or an extra charger for your Fieldpiece refrigerant leak detector, the RWA2 works with both the SRL2K7 and SRL8. Keep one in the office and one in your service bag because Fieldpiece leak detectors are operational while charging.

Fuse 4-pack for LT17 and LT16 - model RF16
Replace blown fuses on Fieldpiece HVAC/R multimeter models LT17 and LT16.

Fuse 4-pack for SC6X-76, HS35-36, LT17A, LT16A - model RFM66
Replace blown fuses on Fieldpiece HVAC/R multimeter models SC6X-76, HS35-36, LT17A and LT16A.

Fuse 4-pack for LT16, LT16A - model RFM70
Replace blown fuses on Fieldpiece HVAC/R multimeter models LT16 and LT16A.

Fuse 4-pack for LT83, LT83A, LT17, HB74 - model RFM74
Replace blown fuses on Fieldpiece HVAC/R multimeter models LT83, LT83A, LT17 and HB74.

Fuse for HB74 - model RFL712
Replace a blown fuse on Fieldpiece HVAC/R multimeter model HB74.

Fuse 4-pack for LT83 serial # >120808, LT83A serial # <70003091 - model RFL83
Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83 after serial number 120808 and model LT83A before serial number 70003091.

Fuse 4-pack for LT83A serial # >70003091  - model RFL83A
Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83A after serial number 70003091.

Fuse 4-pack for LT83 serial # <120808  - model RFS74
Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83 before serial number 120808..

Battery Replacement  for SIR2, SC52, SC53 - model RCR2032
When you're at the distributor this is the battery about the size of a nickel. It powers the SIR2, SC53 and SC53. Don't get caught without the power you need when you're on a call, keep an extra one or two RCR2032's in your bag to make your job easier, faster and better.

3-pack Battery Replacement for PLM2 - model RL736
The Fieldpiece Lighted Extension Mirror model PLM2 takes three model RL736 batteries to shine light where you need it when you need it. Keep a set in your service bag so that you can read part numbers in dark places. About 2/3 the size of a dime.

2-pack Battery Replacement for SPK1, SWT2, SIL2 SIP2 - model RLR44
These batteries power several Fieldpiece thermometers. From our probe style portables to our infrared models, keep an extra pack in your service bag to make your job easier, better and faster. About the size of a small button.

Manometer Tube Adapter 3/16" to 5/16" - RMA316
The RMA316 adapter tubes are designed to work with with Fieldpiece manometers to take the manometer tubes from 3/16" to 5/16" to fit inlet and outlet valves on various models of gas appliances. .